ДАТЧИК ПОЛОЖЕНИЯ РАСПРЕДВАЛА СНЯТИЕ

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)


  2. REMOVE CAMSHAFT POSITION SENSOR (w/ Glow Plug Controller)


    1. A01M3HA

      Disconnect the camshaft position sensor connector.

    2. Remove the bolt and camshaft position sensor from the timing chain cover assembly.

  3. SEPARATE SENSOR BRACKET (w/o Glow Plug Controller)


    1. A01LYHX

      Disconnect the differential pressure sensor connector.

    2. A01M0RX

      Remove the nut and separate the sensor bracket from the cylinder head cover sub-assembly.

  4. REMOVE CAMSHAFT POSITION SENSOR (w/o Glow Plug Controller)


    1. A01M3IE

      Disconnect the camshaft position sensor connector.

    2. A01M30Y

      Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.