СИСТЕМА МЕХАНИЧЕСКОЙ ТРАНСМИССИИ "MULTIMODE" ПРОЦЕДУРА ПОИСКА НЕИСПРАВНОСТЕЙ

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tech Tips


  • The TCM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, be sure to check that there is no trouble in the CAN communication system.

  • *: Use the GTS.

PROCEDURE


  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

    NEXT

  2. CUSTOMER PROBLEM ANALYSIS

    Result
    Proceed to
    NEXT

    NEXT

  3. CONNECT GTS TO DLC3*

    Tech Tips

    If the display indicates a communication fault in the tool, inspect the DLC3.

    Result
    Proceed to
    NEXT

    NEXT

  4. CHECK CAN COMMUNICATION SYSTEM*


    1. Check for CAN communication system DTCs.

      Click here

      Result
      Result Proceed to
      CAN system DTCs are not output A
      CAN system DTCs are output B

      Tech Tips

      The TCM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, check that there is no trouble in the CAN communication system.

      w/o Central Gateway ECU: Click here

      w/ Central Gateway ECU: Click here


    B

    PROCEED TO CAN COMMUNICATION SYSTEM w/o Central Gateway ECU: Click here
    PROCEED TO CAN COMMUNICATION SYSTEM w/ Central Gateway ECU: Click here

    A

  5. CHECK DTC AND FREEZE FRAME DATA*

    Note

    Record or print DTCs and freeze frame data, if necessary.

    Tech Tips

    Refer to DTC Check/Clear.

    Click here

    Result
    Proceed to
    NEXT

    NEXT

  6. CLEAR DTC AND FREEZE FRAME DATA*

    Tech Tips

    Refer to DTC Check/Clear.

    Click here

    Result
    Proceed to
    NEXT

    NEXT

  7. VISUAL INSPECTION

    Result
    Proceed to
    NEXT

    NEXT

  8. PROBLEM SYMPTOM CONFIRMATION

    Result
    Result Proceed to
    Symptom does not occur A
    Symptom occurs B

    B

    GO TO STEP 10 Click here

    A

  9. SYMPTOM SIMULATION

    Tech Tips

    Refer to the relevant pages.

    Click here

    Result
    Proceed to
    NEXT

    NEXT

  10. DTC CHECK*

    Tech Tips

    Refer to DTC Check/Clear.

    Click here

    Result
    Result Proceed to
    DTCs are output A
    DTCs are not output B

    B

    PROBLEM SYMPTOMS TABLE Click here

    A

  11. DTC CHART

    Tech Tips

    Refer to Diagnostic Trouble Code Chart.

    Click here

    Result
    Proceed to
    NEXT

    NEXT

  12. CIRCUIT INSPECTION

    Result
    Proceed to
    NEXT

    NEXT

  13. IDENTIFICATION OF PROBLEM

    Result
    Proceed to
    NEXT

    NEXT

  14. ADJUSTMENT, REPAIR OR REPLACEMENT

    Result
    Proceed to
    NEXT

    NEXT

  15. CONFIRMATION TEST

    Result
    Proceed to
    NEXT

    NEXT

    END

  16. PROBLEM SYMPTOMS TABLE

    Tech Tips

    Refer to Problem Symptoms Table.

    Click here

    Result
    Proceed to
    NEXT

    NEXT

  17. PART INSPECTION

    Result
    Proceed to
    NEXT

    NEXT

    GO TO STEP 14 Click here