POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows) Key-off Operation Function Operates even if Operating Conditions are not Satisfied

DESCRIPTION

• When the front doors are closed, each power window regulator motor assembly can control its power window operation for approximately 43 seconds after the ignition switch is turned from ON to off by receiving operation permission signals from the main body ECU (multiplex network body ECU).

• However, when approximately 43 seconds have elapsed, or the driver door or front passenger door is opened within approximately 43 seconds of the ignition switch being turned off, the power window regulator motor assembly stops operating.

• During an auto operation, when 43 seconds have passed and key-off operation is prohibited, the window continues the operation until the auto operation is completed.

INSPECTION PROCEDURE

PROCEDURE

1. CHECK MANUAL UP / DOWN FUNCTION

   
   

   1. Check that the manual up and down functions using the multiplex network master switch assembly and power window regulator switch assembly can operate all the power windows Click here.

      OK
      Manual up and down functions are normal.

   
   

   NG

   GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) Click here

   OK

2. CHECK REMOTE UP / DOWN FUNCTION

   
   

   1. Check that the remote up and down functions using the multiplex network master switch assembly can operate all the power windows Click here.

      OK
      Remote up and down functions are normal.

   
   

   NG

   GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) Click here

   OK

3. CHECK OPERATION FUNCTION AFTER IGNITION SWITCH IS TURNED OFF

   
   

   1. Check the power window operation function after the ignition switch is turned off.

      Result

      Result Proceed to When power window can still be operated even after opening driver door or front passenger door within approximately 43 seconds of ignition switch being turned off A When power window can still be operated even after approximately 43 seconds have elapsed after ignition switch is turned off (for All Doors) B When power window can still be operated even after approximately 43 seconds have elapsed after ignition switch is turned off (for Driver Door or Front Passenger Door) C When power window can still be operated even after approximately 43 seconds have elapsed after ignition switch is turned off (for Rear LH Door or Rear RH Door) D

   
   

   B

   REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here

   C

   REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR DRIVER DOOR OR FRONT PASSENGER DOOR) Click here

   D

   REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR REAR LH DOOR OR REAR RH DOOR) Click here

   A

4. READ VALUE USING INTELLIGENT TESTER (MAIN BODY)

   
   

   1. Connect the intelligent tester to the DLC3.

   2. Turn the ignition switch to ON.

   3. Turn the intelligent tester on.

   4. Enter the following menus: Body / Main Body / Data List.

   5. Read the Data List according to the display on the intelligent tester.

      Main Body (Main Body ECU (Multiplex Network Body ECU))

      Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
      FR Door Courtesy	Front door courtesy switch RH signal / ON or OFF	ON: Front door RH closed OFF: Front door RH open	-
      FL Door Courtesy	Front door courtesy switch LH signal / ON or OFF	ON: Front door LH closed OFF: Front door LH open	-

      OK
      On the intelligent tester screen, ON or OFF is displayed accordingly.

   
   

   NG

   GO TO LIGHTING SYSTEM (Proceed to Front Door Courtesy Switch Circuit) Click here

   OK

   REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here