AIR CONDITIONING PANEL (for TMMK Made) REMOVAL


  1. PRECAUTION (w/ Navigation System)

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Navigation System)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE UPPER CONSOLE BOX SUB-ASSEMBLY


    1. B000NK9

      Disengage the 4 clips and remove the upper console box sub-assembly.

    2. w/ Seat Heater System:


      1. Disconnect each connector.

  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. B000JA9

      Disengage the 2 claws as shown in the illustration.

    2. B000NQD

      Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.

  5. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY


    1. Move the shift lever to N.

    2. B000MQT

      Disconnect the connector.

    3. Remove the 2 screws <C> or <D>.

    4. B000MVY

      Disengage the 6 clips and remove the rear console upper panel sub-assembly.

  6. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY


    1. B000IYK

      Using a moulding remover, disengage the 11 clips as shown in the illustration.

    2. Disconnect the connector to remove the No. 1 speaker opening cover assembly.

  7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. B000IBG

      Remove the 2 screws <C> or <D>.

    2. B000IK8

      Disengage the 2 clips and guide as shown in the illustration.

    3. Disconnect each connector to remove the upper console panel sub-assembly.

  8. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/o Navigation System)


    1. B000KA1E01
      Text in Illustration
      *a Protective Tape

      Apply protective tape to the areas shown in the illustration.

    2. B000JQL

      Remove the 4 bolts and 2 screws.

    3. B000MC7

      Pull the radio receiver assembly with air conditioning control assembly toward the rear of the vehicle to disengage the 4 clips.

    4. Disconnect each connector and remove the radio receiver assembly with air conditioning control assembly.

  9. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/ Navigation System)


    1. B000IZQE01
      Text in Illustration
      *a Protective Tape

      Apply protective tape to the areas shown in the illustration.

    2. B000M8B

      Remove the 4 bolts and 2 screws.

    3. B000LKD

      Pull the navigation receiver assembly with air conditioning control assembly toward the rear of the vehicle to disengage the 4 clips.

    4. Disconnect each connector and remove the navigation receiver assembly with air conditioning control assembly.

  10. REMOVE NO. 1 RADIO RECEIVER BRACKET


    1. B000K3F

      Remove the 5 screws and No. 1 radio receiver bracket.

  11. REMOVE NO. 2 RADIO RECEIVER BRACKET


    1. B000H41

      Remove the 5 screws and No. 2 radio receiver bracket.

  12. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    1. B000H4V

      Disengage the 2 clips to remove the air conditioning control assembly.