FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Wagon LHD) REMOVAL

PROCEDURE

1. REMOVE FRONT SEAT ASSEMBLY LH

   Click here

2. REMOVE DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

   Click here

3. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)

   Click here

4. REMOVE FRONT DECK FLOOR BOX (w/ Deck Board)

   Click here

5. REMOVE REAR FLOOR MAT ASSEMBLY

   Click here

6. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

   Click here

7. REMOVE DECK FLOOR BOX LH (w/o Woofer)

   Click here

8. REMOVE TONNEAU COVER ASSEMBLY

   Click here

9. REMOVE ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

   Click here

10. REMOVE REAR DECK TRIM COVER

    Click here

11. REMOVE REAR SEAT CUSHION ASSEMBLY

    Click here

12. REMOVE REAR SEAT HEADREST ASSEMBLY

    Click here

13. DISCONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

    Click here

14. REMOVE REAR SEATBACK ASSEMBLY LH

    Click here

15. REMOVE FRONT DOOR SCUFF PLATE LH

    Click here

16. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

17. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

18. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

19. REMOVE LAP BELT OUTER ANCHOR COVER (for LH Side)

    Click here

20. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

    Click here

21. REMOVE CENTER PILLAR LOWER GARNISH LH

    Click here

22. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH

    Click here

23. REMOVE REAR SEAT SIDE GARNISH LH

    Click here

24. REMOVE NO. 2 DECK SIDE TRIM HOOK

    Click here

25. REMOVE RECLINING REMOTE CONTROL BEZEL LH

    Click here

26. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

27. REMOVE TONNEAU COVER HOLDER BRACKET LH (w/ Woofer)

    Click here

28. REMOVE NO. 1 SPEAKER ASSEMBLY WITH BOX (w/ Woofer)

    Click here

29. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

    
    

    1. 

       Remove the screw.

    2. 

       Disengage the guide and disconnect the fuel lid lock open lever sub-assembly as shown in the illustration.

    3. 

       Disconnect the fuel lid lock control cable sub-assembly and remove the fuel lid lock open lever sub-assembly.

30. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for Rear Side)

    
    

    1. 

       Disconnect the fuel lid lock control cable sub-assembly.

    2. Disengage the clamp.

    3. 

       Disengage the 2 claws.

    4. 

       Remove the fuel lid lock control cable sub-assembly as shown in the illustration.

31. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for Front Side)

    
    

    1. Turn back the floor carpet so that the fuel lid lock control cable sub-assembly can be removed.

    2. Disengage the 9 clamps and remove the fuel lid lock control cable sub-assembly.