POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Driver Door Window Only) Auto Up Operation does not Fully Close Power Window (Jam Protection Function is Activated)

DESCRIPTION

If the driver door glass or the front door window regulator assembly (for driver door) does not operate smoothly, the jam protection function may be triggered automatically, resulting in the auto up function being unable to fully close the window.

CAUTION / NOTICE / HINT

Note


  • If the front door window regulator assembly (for driver door) has been replaced with a new one, initialize the power window control system.

    Click here

  • If the front door window regulator assembly (for driver door) has been removed and installed, or if the power window regulator motor assembly (for driver door) was reused when the door glass or door glass run was replaced, initialize the power window control system.

    Click here

PROCEDURE


  1. PERFORM INITIALIZATION (FOR DRIVER DOOR)


    1. Initialize the front door window regulator assembly (for driver door).

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  2. CHECK POWER WINDOW CONTROL SYSTEM (AUTO UP/DOWN FUNCTION (FOR DRIVER DOOR))


    1. Check that the driver door power window moves when the auto up and down function of the power window regulator master switch assembly is operated.

      Click here

      OK
      Driver door power window auto up and down function is normal.
      Result
      Proceed to
      OK
      NG

    OK

    END (PROBLEM DUE TO INITIALIZATION FAILURE)

    NG

  3. CHECK WINDOW GLASS SLIDING MOVEMENT (FOR DRIVER DOOR)


    1. Remove the window regulator.

    2. Install the window glass to the door glass run.

    3. Check if the door window regulator operates smoothly.

    4. Check that the window glass slides smoothly when sliding it up by hand.

      CAUTION:

      Perform initialization again.

      Tech Tips

      Ensure the following:


      • The window glass fits with the glass run without improper contact or deformation.

      • Foreign matter is not caught in the glass run.

      OK
      Door window glass slides smoothly.
      Result
      Proceed to
      OK
      NG

    OK

    REPLACE FRONT DOOR WINDOW REGULATOR ASSEMBLY (FOR DRIVER DOOR) except Sedan: Click here
    REPLACE FRONT DOOR WINDOW REGULATOR ASSEMBLY (FOR DRIVER DOOR) for Sedan: Click here

    NG

    FIT WINDOW GLASS CORRECTLY (REMOVE FOREIGN MATTER CAUSING IMPROPER FIT OR REPLACE PARTS)