CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for both the RH and LH sides.
The procedure described below is for the LH side.
PROCEDURE
PRECAUTION
Note
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
REMOVE DOOR ASSIST GRIP ASSEMBLY
REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)
REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)
REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH
REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY
REMOVE FRONT DOOR SERVICE HOLE COVER
w/ Front No. 1 Speaker:
Disconnect the connector.
Remove the front door service hole cover.
REMOVE FRONT DOOR GLASS SUB-ASSEMBLY
REMOVE FRONT DOOR WINDOW REGULATOR ASSEMBLY