POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on 4 Windows) Key-off Operation Function Operates even if Operating Conditions are not Satisfied

DESCRIPTION

• When the front doors are closed, each door window regulator assembly can control its power window operation for approximately 43 seconds after the ignition switch is turned from ON to off by receiving operation permission signals from the main body ECU (multiplex network body ECU).

• However, when approximately 43 seconds have elapsed, or the driver door or front passenger door is opened within approximately 43 seconds of the ignition switch being turned off, the door window regulator assembly stops operating.

• During auto operation, when 43 seconds have elapsed and key-off operation is prohibited, the window continues the operation until the auto operation is completed.

CAUTION / NOTICE / HINT

PROCEDURE

1. CHECK MANUAL UP / DOWN FUNCTION

   
   

   1. Check that the manual up and down function using the power window regulator master switch assembly, power window regulator switch assembly and rear power window regulator switch assembly (for LH or RH door) can operate the power windows.

      Click here

      OK
      Manual up and down function is normal.

      Result
      Proceed to OK NG

   
   

   NG

   GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) Click here

   OK

2. CHECK REMOTE UP / DOWN FUNCTION

   
   

   1. Check that the remote up and down function using the power window regulator master switch assembly can operate all the power windows.

      Click here

      OK
      Remote up and down function is normal.

      Result
      Proceed to OK NG

   
   

   NG

   GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) Click here

   OK

3. CHECK OPERATION FUNCTION AFTER IGNITION SWITCH IS TURNED OFF

   
   

   1. Check the power window operation function after the ignition switch is turned off.

      Result

      Result Proceed to Power window can still be operated even after opening driver door or front passenger door within approximately 43 seconds of ignition switch being turned off A Power window can still be operated even after approximately 43 seconds have elapsed after ignition switch is turned off (for All Doors) B Power window can still be operated even after approximately 43 seconds have elapsed after ignition switch is turned off (for Driver Door or Front Passenger Door) C Power window can still be operated even after approximately 43 seconds have elapsed after ignition switch is turned off (for Rear LH Door or Rear RH Door) D

   
   

   B

   REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) for LHD: Click here REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) for RHD: Click here

   C

   REPLACE FRONT DOOR WINDOW REGULATOR ASSEMBLY (FOR DRIVER DOOR OR PASSENGER DOOR) for Hatchback and for Wagon: Click here REPLACE FRONT DOOR WINDOW REGULATOR ASSEMBLY (FOR DRIVER DOOR OR PASSENGER DOOR) for Sedan: Click here

   D

   REPLACE REAR DOOR WINDOW REGULATOR ASSEMBLY (FOR LH DOOR OR RH DOOR) for Hatchback and for Wagon: Click here REPLACE REAR DOOR WINDOW REGULATOR ASSEMBLY (FOR LH DOOR OR RH DOOR) for Sedan: Click here

   A

4. READ VALUE USING GTS (MAIN BODY)

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the ignition switch to ON.

   3. Turn the GTS on.

   4. Enter the following menus: Body Electrical / Main Body / Data List.

   5. Read the Data List according to the display on the GTS.

      
      Body Electrical > Main Body > Data List

      Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
      FR Door Courtesy SW	Front door courtesy switch RH signal	ON or OFF	ON: Front door RH open OFF: Front door RH closed	-
      FL Door Courtesy SW	Front door courtesy switch LH signal	ON or OFF	ON: Front door LH open OFF: Front door LH closed	-

      
      Body Electrical > Main Body > Data List

      Tester Display
      FR Door Courtesy SW
      FL Door Courtesy SW

      OK
      On the GTS screen, ON or OFF is displayed accordingly.

      Result
      Proceed to OK NG

   
   

   OK

   REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) for LHD: Click here REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) for RHD: Click here

   NG

   GO TO LIGHTING SYSTEM (Proceed to Front Door Courtesy Switch Circuit) Click here