POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on 4 Windows) Remote Up / Down Function does not Operate

DESCRIPTION

When the ignition switch is ON, the power window regulator master switch assembly sends remote up and down signals to each door window regulator assembly via LIN communication.

WIRING DIAGRAM

A01M0K8E03

CAUTION / NOTICE / HINT

Note


  • The power window control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the power window control system after confirming that the communication system is functioning properly.

    Click here

  • If a door window regulator assembly has been replaced with a new one, initialize the power window control system.

    Click here

PROCEDURE


  1. READ VALUE USING GTS (MAIN BODY)


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. Read the Data List according to the display on the GTS.


      Body Electrical > Main Body > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Communication P-Door Motor Connection status between front door window regulator assembly (for passenger door) and main body ECU (multiplex network body ECU) OK or STOP

      OK: Normal communication

      STOP: Communication stopped

      -
      Communication RR-Door Motor Connection status between rear door window regulator assembly (for RH door) and main body ECU (multiplex network body ECU) OK or STOP

      OK: Normal communication

      STOP: Communication stopped

      -
      Communication RL-Door Motor Connection status between rear door window regulator assembly (for LH door) and main body ECU (multiplex network body ECU) OK or STOP

      OK: Normal communication

      STOP: Communication stopped

      -
      Communication Master SW Connection status between power window regulator master switch assembly and main body ECU (multiplex network body ECU) OK or STOP

      OK: Normal communication

      STOP: Communication stopped

      -

      Body Electrical > Main Body > Data List
      Tester Display
      Communication P-Door Motor
      Communication RR-Door Motor
      Communication RL-Door Motor
      Communication Master SW
      OK
      On the GTS screen, OK is displayed.
      Result
      Proceed to
      OK
      NG

    NG
    OK
  2. READ VALUE USING GTS (MASTER SWITCH)


    1. Enter the following menus: Body Electrical / Master Switch / Data List.

    2. Read the Data List according to the display on the GTS.


      Body Electrical > Master Switch > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      P Door P/W Auto SW Front passenger door power window auto up and down switch signal ON or OFF

      ON: Front passenger door power window auto switch being operated

      OFF: Front passenger door power window auto switch not being operated

      -
      RR Door P/W Auto SW Rear RH door power window auto up and down switch signal ON or OFF

      ON: Rear RH power window auto switch being operated

      OFF: Rear RH power window auto switch not being operated

      -
      RL Door P/W Auto SW Rear LH door power window auto up and down switch signal ON or OFF

      ON: Rear LH power window auto switch being operated

      OFF: Rear LH power window auto switch not being operated

      -
      P Door P/W Up SW Front passenger door power window manual up switch signal ON or OFF

      ON: Front passenger door power window manual up switch being operated

      OFF: Front passenger door power window manual up switch not being operated

      -
      RR Door P/W up switch Rear RH door power window manual up switch signal ON or OFF

      ON: Rear RH power window manual up switch being operated

      OFF: Rear RH power window manual up switch not being operated

      -
      RL Door P/W up switch Rear LH door power window manual up switch signal ON or OFF

      ON: Rear LH power window manual up switch being operated

      OFF: Rear LH power window manual up switch not being operated

      -
      P Door P/W Down SW Front passenger door power window manual down switch signal ON or OFF

      ON: Front passenger door power window manual down switch being operated

      OFF: Front passenger door power window manual down switch not being operated

      -
      RR Door P/W Down SW Rear RH door power window manual down switch signal ON or OFF

      ON: Rear RH power window manual down switch being operated

      OFF: Rear RH power window manual down switch not being operated

      -
      RL Door P/W Down SW Rear LH door power window manual down switch signal ON or OFF

      ON: Rear LH power window manual down switch being operated

      OFF: Rear LH power window manual down switch not being operated

      -
      Window Lock Switch Status Window lock switch signal ON or OFF

      ON: Window lock switch LOCK position

      OFF: Window lock switch UNLOCK position

      -

      Body Electrical > Master Switch > Data List
      Tester Display
      P Door P/W Auto SW
      RR Door P/W Auto SW
      RL Door P/W Auto SW
      P Door P/W Up SW
      RR Door P/W up switch
      RL Door P/W up switch
      P Door P/W Down SW
      RR Door P/W Down SW
      RL Door P/W Down SW
      Window Lock Switch Status
      OK
      On the GTS screen, ON or OFF is displayed accordingly.
      Result
      Result Proceed to
      NG A
      OK (Front passenger door power window remote up and down function does not operate) B
      OK (Rear LH door power window remote up and down function does not operate) C
      OK (Rear RH door power window remote up and down function does not operate)

    A
    B
    C