CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for the RH side and LH side.
The procedure described below is for the LH side.
PROCEDURE
INSPECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY
INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY
Engage the guide.
Install the rear seat 3 point type outer belt assembly with the nut.
Connect the floor anchor of the rear seat 3 point type outer belt assembly with the bolt.
Check if the ELR locks.
Note
The check should be performed with the rear seat 3 point type outer belt assembly installed.
With the rear seat 3 point type outer belt assembly installed, check that the belt locks when it is pulled out quickly.
INSTALL DECK TRIM SIDE PANEL ASSEMBLY
INSTALL RECLINING REMOTE CONTROL BEZEL
INSTALL NO. 2 DECK SIDE TRIM HOOK
INSTALL REAR SEAT SIDE GARNISH
INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP
for LH Side:
for RH Side:
INSTALL REAR DOOR SCUFF PLATE
INSTALL REAR SEATBACK ASSEMBLY LH (for LH Side)
INSTALL REAR SEATBACK ASSEMBLY RH (for RH Side)
CONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY
CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (for RH Side)
INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (w/ Center Headrest)
INSTALL REAR SEAT HEADREST ASSEMBLY
INSTALL REAR SEAT CUSHION ASSEMBLY
INSTALL REAR DECK TRIM COVER
INSTALL ROOM PARTITION NET ASSEMBLY (w/ Partition Net)
INSTALL TONNEAU COVER ASSEMBLY
INSTALL DECK FLOOR BOX RH (for RH Side)
INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY (for RH Side)
w/ Deck Board:
INSTALL DECK FLOOR BOX LH (for LH Side)
w/o Woofer:
INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (for LH Side)
w/ Deck Board:
INSTALL REAR FLOOR MAT ASSEMBLY
INSTALL FRONT DECK FLOOR BOX (w/ Deck Board)
INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)
INSTALL DECK BOARD SUB-ASSEMBLY (w/ Deck Board)