FRONT SEAT OUTER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY


    1. A00311TN01

      Engage the guide and temporarily install the front shoulder belt anchor adjuster assembly with the 2 bolts.

    2. Fully tighten the bolt <A> first, then the bolt <B>.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  2. INSPECT FRONT SEAT OUTER BELT ASSEMBLY

    Click here

  3. INSTALL FRONT SEAT OUTER BELT ASSEMBLY


    1. A003189N01

      Install the bolt <A> first, then the bolt <B> to temporarily install the front seat outer belt assembly.

    2. except Sedan:


      1. Fully tighten the 2 bolts.

        Torque:
        Bolt <A>
        12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }
        Bolt <B>
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    3. for Sedan:


      1. Fully tighten the 2 bolts.

        Torque:
        Bolt <A>
        5.0 N*m  { 51 kgf*cm, 44 in.*lbf }
        Bolt <B>
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    4. A0030ZFC01
      *a Locking Button
      *b Lock

      Connect the pretensioner connector and lock the locking button as shown in the illustration.

      Note

      Securely lock the locking button.

    5. Connect the shoulder anchor of the front seat outer belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  4. INSTALL CENTER PILLAR UPPER GARNISH (for Sedan)

    Click here

  5. INSTALL CENTER PILLAR GARNISH ASSEMBLY (for Hatchback, Wagon)

    for Hatchback:

    Click here

    for Wagon:

    Click here

  6. INSTALL CENTER PILLAR LOWER GARNISH

    for Hatchback:

    Click here

    for Wagon:

    Click here

    for Sedan:

    Click here

  7. CONNECT FRONT SEAT OUTER BELT ASSEMBLY


    1. Install the floor anchor of the front seat outer belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    2. Check that the ELR locks.

      Note

      The check should be performed with the front seat outer belt assembly installed.


      1. With the front seat outer belt assembly installed, check that the belt locks when it is pulled out quickly.

  8. INSTALL LAP BELT OUTER ANCHOR COVER


    1. Engage the 3 claws to install the lap belt outer anchor cover.

  9. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP (for Hatchback)

    for LH Side: Click here

    for RH Side: Click here

  10. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP (for Wagon)

    for LH Side: Click here

    for RH Side: Click here

  11. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP (for Sedan)

    for LH Side: Click here

    for RH Side: Click here

  12. INSTALL REAR DOOR SCUFF PLATE

    for Hatchback:

    Click here

    for Wagon:

    Click here

    for Sedan:

    Click here

  13. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP (for Hatchback)

    for LH Side: Click here

    for RH Side: Click here

  14. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP (for Wagon)

    for LH Side: Click here

    for RH Side: Click here

  15. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP (for Sedan)

    for LH Side: Click here

    for RH Side: Click here

  16. INSTALL FRONT DOOR SCUFF PLATE

    for Hatchback:

    Click here

    for Wagon:

    Click here

    for Sedan:

    Click here

  17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  18. INSPECT SRS WARNING LIGHT

    Click here