ELECTRICAL KEY OSCILLATOR(for Wagon Inside Luggage Compartment) INSTALLATION

PROCEDURE

1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

   
   

   1. Connect the connector.

   2. Engage the clamp to install the No. 1 indoor electrical key antenna assembly.

      Note

      Be careful when installing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.

   3. 

      Install the separate type rear seatback cover RH with the 2 clips.

2. INSTALL REAR FLOOR MAT ASSEMBLY

   Click here

3. INSTALL FRONT DECK FLOOR BOX (w/ Deck Board)

   Click here

4. INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)

   Click here

5. INSTALL DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

   Click here