PARKING BRAKE LEVER INSTALLATION

PROCEDURE


  1. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY


    1. Install the parking brake lever sub-assembly with the 2 bolts.

      Torque:
      14.5 N*m  { 148 kgf*cm, 11 ft.*lbf }

    2. Connect the parking brake switch connector.

    3. Temporarily install the lock nut.

      Tech Tips

      After adjusting parking brake lever travel, tighten the lock nut.

  2. CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A00Y9MCC01
      *1 No. 3 Parking Brake Cable Assembly
      *2 No. 2 Parking Brake Cable Assembly

      Connect the No. 3 parking brake cable assembly to the parking brake lever sub-assembly as shown in the illustration.

  3. CONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY

    Tech Tips

    Perform the same procedure as for the No. 3 parking brake cable assembly.

  4. ADJUST PARKING BRAKE LEVER TRAVEL

    Click here

  5. INSPECT BRAKE WARNING LIGHT

    Click here

  6. INSTALL REAR CONSOLE BOX ASSEMBLY

    Click here