CLUTCH ACCUMULATOR(for EC69) REMOVAL

PROCEDURE

1. REMOVE NO. 1 ENGINE UNDER COVER (for Half Cover Type)

   Click here

2. REMOVE NO. 1 ENGINE UNDER COVER (for Full Cover Type)

   Click here

3. REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

   
   

   • w/ Glow Plug Controller:

     Click here

   • w/o Glow Plug Controller:

     Click here

4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (w/ Glow Plug Controller)

   Click here

5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (w/o Glow Plug Controller)

   Click here

6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (w/ Glow Plug Controller)

   Click here

7. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (w/o Glow Plug Controller)

   Click here

8. REMOVE BATTERY (w/ Glow Plug Controller)

   Click here

9. REMOVE BATTERY (w/o Glow Plug Controller)

   Click here

10. REMOVE NO. 2 BATTERY CARRIER (w/ Glow Plug Controller)

    Click here

11. REMOVE NO. 2 BATTERY CARRIER (w/o Glow Plug Controller)

    Click here

12. REMOVE CLUTCH ACCUMULATOR ASSEMBLY

    
    

    1. 

       Remove the bolt and separate the clutch line clamp (A) from the manual transaxle assembly.

    2. Using a 10 mm union nut wrench, remove the bleeder to accumulator tube and accumulator to flexible hose tube (B).

       Tech Tips

       Use a container to collect the fluid.

    3. Remove the clip and separate the clutch hose (C).

    4. 

       Remove the 3 bolts and clutch accumulator assembly from the manual transaxle assembly.