CLEARANCE WARNING BUZZER(for Wagon Rear Side) REMOVAL

PROCEDURE

1. REMOVE DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

   Click here

2. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)

   Click here

3. REMOVE FRONT DECK FLOOR BOX (w/ Deck Board)

   Click here

4. REMOVE REAR FLOOR MAT ASSEMBLY

   Click here

5. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

   Click here

6. REMOVE DECK FLOOR BOX RH

   Click here

7. REMOVE TONNEAU COVER ASSEMBLY

   Click here

8. REMOVE ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

   Click here

9. REMOVE REAR DECK TRIM COVER

   Click here

10. REMOVE REAR SEAT CUSHION ASSEMBLY

    Click here

11. REMOVE REAR SEAT HEADREST ASSEMBLY

    Click here

12. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY (w/ Center Headrest)

    Click here

13. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH

    Click here

14. DISCONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

    Click here

15. REMOVE REAR SEATBACK ASSEMBLY RH

    Click here

16. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

17. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

18. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

19. REMOVE REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

20. REMOVE NO. 2 DECK SIDE TRIM HOOK

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

21. REMOVE RECLINING REMOTE CONTROL BEZEL RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

22. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

23. REMOVE NO. 2 CLEARANCE WARNING BUZZER

    
    

    1. 

       Disconnect the connector.

    2. Disengage the clamp and remove the No. 2 clearance warning buzzer.