DOOR CONTROL RECEIVER(for Wagon) INSTALLATION

PROCEDURE


  1. INSTALL DOOR CONTROL RECEIVER


    1. Engage the 2 guides.

    2. Install the door control receiver with the bolt.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }
    3. Connect the connector.

  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  3. INSTALL RECLINING REMOTE CONTROL BEZEL LH

    Click here

  4. INSTALL NO. 2 DECK SIDE TRIM HOOK

    Click here

  5. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

  6. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH

    Click here

  7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  8. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  9. INSTALL REAR SEATBACK ASSEMBLY LH

    Click here

  10. CONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

    Click here

  11. INSTALL REAR SEAT HEADREST ASSEMBLY

  12. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

  13. INSTALL REAR DECK TRIM COVER

    Click here

  14. INSTALL ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

    Click here

  15. INSTALL TONNEAU COVER ASSEMBLY

    Click here

  16. INSTALL DECK FLOOR BOX LH

    w/o Woofer:

    Click here

  17. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

    Click here

  18. INSTALL REAR FLOOR MAT ASSEMBLY

    Click here

  19. INSTALL FRONT DECK FLOOR BOX (w/ Deck Board)

    Click here

  20. INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)

    Click here

  21. INSTALL DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

    Click here