FUEL PUMP ECU(for Hatchback) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)

    Click here

  4. REMOVE REAR FLOOR MAT ASSEMBLY

    Click here

  5. REMOVE REAR DECK FLOOR BOX (w/ Deck Floor Box)

    Click here

  6. REMOVE DECK FLOOR BOX LH (w/ Deck Floor Box)

    Click here

  7. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

    Click here

  8. REMOVE REAR DECK TRIM COVER

    Click here

  9. REMOVE REAR SEAT ASSEMBLY

    Click here

  10. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  11. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  12. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH

    Click here

  13. REMOVE REAR SEAT SIDE GARNISH LH

    Click here

  14. REMOVE NO. 2 DECK SIDE TRIM HOOK

    Click here

  15. REMOVE LOWER DECK TRIM SIDE BOARD LH (w/ Deck Board)

    Click here

  16. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  17. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH

    Click here

  18. REMOVE FUEL PUMP CONTROL ECU ASSEMBLY


    1. B0042IB

      Disconnect the connector from the fuel pump control ECU assembly.

    2. Remove the 2 nuts and fuel pump control ECU assembly.

      Note

      Do not reuse the fuel pump control ECU assembly if it has been dropped or subjected to a severe impact.

      Tech Tips

      If a malfunction such as pump lock occurs and the fuel pump is damaged, excessive current may be continuously applied to the fuel pump control ECU assembly, damaging its internal parts. Make sure to replace the fuel pump control ECU assembly at the same time when replacing the fuel pump.