FUEL PUMP ECU(for Wagon) INSTALLATION

PROCEDURE

1. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY

   
   

   1. Install the fuel pump control ECU assembly with the 2 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Connect the fuel pump control ECU assembly connector.

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

   Click here

3. INSTALL RECLINING REMOTE CONTROL BEZEL LH

   Click here

4. INSTALL NO. 2 DECK SIDE TRIM HOOK

   Click here

5. INSTALL REAR SEAT SIDE GARNISH LH

   Click here

6. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH

   Click here

7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

   Click here

8. INSTALL REAR DOOR SCUFF PLATE LH

   Click here

9. INSTALL REAR SEATBACK ASSEMBLY LH

   Click here

10. CONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

    Click here

11. INSTALL REAR SEAT HEADREST ASSEMBLY

12. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

13. INSTALL REAR DECK TRIM COVER

    Click here

14. INSTALL ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

    Click here

15. INSTALL TONNEAU COVER ASSEMBLY

    Click here

16. INSTALL DECK FLOOR BOX LH

    w/o Woofer:

    Click here

17. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

    Click here

18. INSTALL REAR FLOOR MAT ASSEMBLY

    Click here

19. INSTALL FRONT DECK FLOOR BOX (w/ Deck Board)

    Click here

20. INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)

    Click here

21. INSTALL DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

    Click here

22. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here