STARTER(w/o Stop And Start System) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER

  4. REMOVE BATTERY

    Click here

  5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  7. REMOVE NO. 3 AIR HOSE

    Click here

  8. REMOVE NO. 2 AIR TUBE

    Click here

  9. REMOVE NO. 1 AIR TUBE

    Click here

  10. REMOVE STARTER ASSEMBLY


    1. A00Y8DK

      Open the terminal cap.

    2. Remove the nut and disconnect terminal 30.

    3. Disconnect the connector and disengage the harness clamp.

    4. A00YB8Y

      Remove the 2 bolts and starter assembly.