STARTER(w/o Stop And Start System) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)


  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER

  4. REMOVE BATTERY


  5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


  6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY


  7. REMOVE NO. 3 AIR HOSE


  8. REMOVE NO. 2 AIR TUBE


  9. REMOVE NO. 1 AIR TUBE

    Click here

  10. REMOVE STARTER ASSEMBLY


    1. A01T9R5

      Open the terminal cap.

    2. Remove the nut and disconnect terminal 30.

    3. Disconnect the connector and disengage the harness clamp.

    4. A01T9LM

      Remove the 2 bolts and starter assembly.