MANIFOLD ABSOLUTE PRESSURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    Click here

  2. DISCONNECT ENGINE WIRE


    1. A00YBBJ

      Remove the bolt, and disconnect the engine wire.

  3. REMOVE DIESEL TURBO PRESSURE SENSOR


    1. A00YB2Y

      Disconnect the connector from the diesel turbo pressure sensor.

    2. Disconnect the vacuum hose from the diesel turbo pressure sensor.

    3. A00YA56

      Remove the bolt and diesel turbo pressure sensor.

      Note

      If a component has been dropped or subjected to a strong impact, replace it.