CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE


  1. INSTALL CAMSHAFT POSITION SENSOR (w/ Glow Plug Controller)


    1. A01LXMZC01
      *1 O-ring

      Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

      Note

      If reusing the camshaft position sensor, be sure to inspect the O-ring.

    2. Install the camshaft position sensor to the timing chain cover assembly with the bolt.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

      Note


      • If the camshaft position sensor has been struck or dropped, replace it.

      • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft position sensor.

    3. Connect the camshaft position sensor connector.

  2. INSTALL CAMSHAFT POSITION SENSOR (w/o Glow Plug Controller)


    1. A01LUZ8C01
      *1 O-ring

      Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

      Note

      If reusing the camshaft position sensor, be sure to inspect the O-ring.

    2. Install the camshaft position sensor to the cylinder head cover sub-assembly with the bolt.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

      Note


      • If the camshaft position sensor has been struck or dropped, replace it.

      • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft position sensor.

    3. Connect the camshaft position sensor connector.

  3. INSTALL SENSOR BRACKET (w/o Glow Plug Controller)


    1. Install the sensor bracket to the cylinder head cover sub-assembly with the nut.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  4. INSPECT FOR OIL LEAK

    Click here

  5. INSTALL NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)