ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE

1. REMOVE NO. 1 ENGINE UNDER COVER

   
   

   • w/ Glow Plug Controller:

   
   

   • for Full Cover Type:

     Click here

   • for Half Cover Type:

     Click here

   • w/o Glow Plug Controller:

   
   

   • for Full Cover Type:

     Click here

   • for Half Cover Type:

     Click here

2. DRAIN ENGINE COOLANT

   Click here

3. REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

   
   

   • w/ Glow Plug Controller:

     Click here

   • w/o Glow Plug Controller:

     Click here

4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

   
   

   • w/ Glow Plug Controller:

     Click here

   • w/o Glow Plug Controller:

     Click here

5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

   
   

   • w/ Glow Plug Controller:

     Click here

   • w/o Glow Plug Controller:

     Click here

6. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

   
   

   1. 

      Disconnect the connector from the outlet water sub-assembly.

   2. 

      Using a 19 mm socket wrench, remove the engine coolant temperature sensor from the cylinder head sub-assembly.

      Note

      If a component has been dropped or subjected to a strong impact, replace it.

   3. Remove the gasket from the engine coolant temperature sensor.