INTAKE MANIFOLD REMOVAL

PROCEDURE


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  2. REMOVE WATER GUARD PLATE LH (for LHD)


  3. REMOVE WATER GUARD PLATE LH (for RHD)


  4. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)


  5. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)


  6. REMOVE OUTER COWL TOP PANEL (for LHD)


  7. REMOVE OUTER COWL TOP PANEL (for RHD)


  8. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY

    Click here

  9. DISCONNECT HEATER WATER OUTLET HOSE A

    Click here

  10. DISCONNECT HEATER WATER INLET HOSE A

    Click here

  11. REMOVE NO. 2 HEATER BRACKET SUB-ASSEMBLY


    1. B0043I8

      Remove the bolt and No. 2 heater bracket sub-assembly.

  12. REMOVE NO. 1 EGR PIPE


    1. B0043O3

      Remove the 2 nuts, 2 bolts and No. 1 EGR pipe.

    2. Remove the 2 EGR pipe gaskets.

  13. REMOVE VACUUM SENSOR (MANIFOLD ABSOLUTE PRESSURE SENSOR)


    1. B0043JY

      Disconnect the 2 clamps and connector, and remove the bolt and bracket from the intake manifold.

    2. B004370

      Disconnect the vacuum hose.

    3. Remove the bolt and vacuum sensor (manifold absolute pressure sensor) from the intake manifold.

  14. DISCONNECT UNION TO CONNECTOR TUBE HOSE (for LHD)

    Click here

  15. DISCONNECT CHECK VALVE TO BRAKE BOOSTER HOSE (for RHD)

    Click here

  16. REMOVE INTAKE MANIFOLD


    1. B0042PE

      Slide the clip and disconnect the ventilation hose from the intake manifold.

    2. Disconnect the fuel vapor feed hose from the intake manifold.

    3. B0041ZI

      Remove the 3 bolts, 2 nuts and intake manifold.

  17. REMOVE NO. 1 INTAKE MANIFOLD TO HEAD GASKET


    1. B004429

      Remove the No. 1 intake manifold to head gasket from the intake manifold.