THROTTLE BODY REMOVAL
PROCEDURE
DRAIN ENGINE COOLANT
REMOVE NO. 1 ENGINE COVER
REMOVE AIR CLEANER CAP SUB-ASSEMBLY
-
Loosen the hose clamp and separate the air cleaner cap sub-assembly from the throttle with motor body assembly.
-
Disconnect the mass air flow meter connector and separate the 2 wire harness clamps from the air cleaner cap sub-assembly.
-
Slide the clip and disconnect the ventilation hose.
-
Separate the purge valve (purge VSV) from the air cleaner cap sub-assembly.
-
Unlock the 2 clamps and remove the air cleaner cap sub-assembly.
-
REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY
-
Disconnect the throttle with motor body assembly connector and wire harness clamp.
-
Slide the 2 clips and disconnect the 2 water hoses from the throttle with motor body assembly.
Remove the 4 bolts to remove the throttle with motor body assembly and wire harness bracket.
-
REMOVE THROTTLE BODY GASKET
-
Remove the throttle body gasket from the intake manifold.
-