INTAKE MANIFOLD REMOVAL

PROCEDURE


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  2. REMOVE WATER GUARD PLATE LH (for LHD)

    Click here

  3. REMOVE WATER GUARD PLATE LH (for RHD)

    Click here

  4. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)

    Click here

  5. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

    Click here

  6. REMOVE OUTER COWL TOP PANEL

    Click here

  7. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY

    Click here

  8. DISCONNECT HEATER WATER OUTLET HOSE A

    Click here

  9. DISCONNECT HEATER WATER INLET HOSE A

    Click here

  10. REMOVE NO. 2 HEATER BRACKET SUB-ASSEMBLY


    1. A00Y76P

      Remove the bolt and No. 2 heater bracket sub-assembly.

  11. REMOVE NO. 1 EGR PIPE


    1. A00Y920

      Remove the 2 nuts, 2 bolts and No. 1 EGR pipe.

    2. Remove the 2 EGR pipe gaskets.

  12. REMOVE VACUUM SENSOR (MANIFOLD ABSOLUTE PRESSURE SENSOR)


    1. A00Y7A2

      Disconnect the 2 clamps and connector, and remove the bolt and bracket from the intake manifold.

    2. A00Y69S

      Disconnect the vacuum hose.

    3. Remove the bolt and vacuum sensor (manifold absolute pressure sensor) from the intake manifold.

  13. DISCONNECT UNION TO CONNECTOR TUBE HOSE (for LHD)

    Click here

  14. DISCONNECT CHECK VALVE TO BRAKE BOOSTER HOSE (for RHD)

    Click here

  15. REMOVE INTAKE MANIFOLD


    1. A00Y9D7

      Slide the clip and disconnect the ventilation hose from the intake manifold.

    2. Disconnect the fuel vapor feed hose from the intake manifold.

    3. A00Y814

      Remove the 3 bolts, 2 nuts and intake manifold.

  16. REMOVE NO. 1 INTAKE MANIFOLD TO HEAD GASKET


    1. A00Y817

      Remove the No. 1 intake manifold to head gasket from the intake manifold.