HEATER EXHAUST PIPE(w/ Combustion Type Power Heater) INSTALLATION

PROCEDURE

1. INSTALL HEAT EXCHANGER UNIT GASKET

   Click here

2. INSTALL NO. 2 EXHAUST PIPE SUB-ASSEMBLY

   
   

   1. 

      Install the No. 2 exhaust pipe sub-assembly with the 2 bolts.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

3. INSTALL HEATER WITH EXHAUST PIPE ASSEMBLY

   Click here

4. INSTALL NO. 1 EXHAUST PIPE SUB-ASSEMBLY

   
   

   1. 

      Install the No. 1 exhaust pipe sub-assembly with the 2 nuts labeled <A>.

      Torque:

      7.5 N*m  { 77 kgf*cm, 66 in.*lbf }

   2. Install the nut labeled <B>.

      Torque:

      7.5 N*m  { 77 kgf*cm, 66 in.*lbf }

5. INSTALL AIR DUCT

   Click here

6. INSTALL OUTER COWL TOP PANEL

   Click here

7. INSTALL DIFFERENTIAL PRESSURE SENSOR ASSEMBLY (for DPF)

   Click here

8. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here

9. INSTALL COWL TOP VENTILATOR LOUVER LH

   Click here

10. INSTALL COWL TOP VENTILATOR LOUVER RH

    Click here

11. INSTALL HOOD TO COWL TOP SEAL

    Click here

12. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH

    Click here

13. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH

    Click here

14. INSTALL FRONT WIPER ARM HEAD CAP

    Click here

15. INSTALL NO. 1 ENGINE COVER

    Click here