GENERATOR INSTALLATION

PROCEDURE


  1. INSTALL GENERATOR ASSEMBLY


    1. A002MDKE02

      Using an E12 "TORX" socket wrench, install the generator assembly with the 2 bolts.

      Torque:
      38 N*m  { 387 kgf*cm, 28 ft.*lbf }

      Tech Tips

      Install the generator assembly with bolt A inserted as shown in the illustration.

    2. Connect the generator wire with the nut.

      Torque:
      13 N*m  { 129 kgf*cm, 9 ft.*lbf }
    3. Install the terminal cap.

    4. Connect the generator connector.

  2. INSTALL FAN AND GENERATOR V BELT

    Click here

  3. INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT RH

    Click here

  4. INSTALL REAR ENGINE UNDER COVER RH

    Click here

  5. INSTALL INTAKE MANIFOLD

    Click here

  6. INSTALL RADIATOR SUPPORT OPENING COVER


    1. Attach the 4 hooks and install the radiator support opening cover.

    2. Install the 3 clips.

  7. INSTALL NO. 1 ENGINE COVER


    1. A002QTGE02
      Text in Illustration
      *a Installation Points

      Attach the 4 clips to install the No. 1 engine cover.

      Tech Tips

      When attaching the clips, press the protrusions on the top of the No. 1 engine cover at the clip installation points.

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.