AIR CONDITIONING PANEL(for Automatic Air Conditioning System) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  3. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Audio, for Radio and Display Type)

    Click here

  5. REMOVE STEREO OPENING COVER WITH BRACKET (w/o Audio)

    Click here

  6. REMOVE RADIO RECEIVER WITH BRACKET (w/ Audio)


    1. for Radio Receiver Type:

      Remove the radio receiver assembly with bracket Click here.

    2. for Radio and Display Type:

      Remove the radio receiver assembly with bracket Click here.

  7. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  8. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (except Manual Transaxle)

    Click here

  9. REMOVE SHIFTING HOLE COVER (for Manual Transaxle)

    Click here

  10. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (except Manual Transaxle)

    Click here

  11. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle)

    Click here

  12. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

    A002Q35

    1. Detach the 4 clips.

    2. Disconnect the connector and remove the air conditioning control.