CENTER AIRBAG SENSOR ASSEMBLY REMOVAL

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY


    1. Remove the rear console box sub-assembly Click here.

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  5. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  6. REMOVE RADIO RECEIVER ASSEMBLY (w/ Audio)


    1. Remove the radio receiver assembly Click here.

  7. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Audio)

    Click here

  8. REMOVE STEREO OPENING COVER WITH BRACKET (w/o Audio)

    Click here

  9. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  10. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (except Manual Transaxle)

    Click here

  11. REMOVE SHIFTING HOLE COVER (for Manual Transaxle)

    Click here

  12. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (except Manual Transaxle)

    Click here

  13. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle)

    Click here

  14. REMOVE FRONT NO. 1 CONSOLE BOX INSERT

    Click here

  15. REMOVE FRONT NO. 2 CONSOLE BOX INSERT

    Click here

  16. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  17. REMOVE CENTER AIRBAG SENSOR ASSEMBLY


    1. A002NKF

      Disconnect the connector.

    2. Remove the 3 bolts and center airbag sensor.