ULTRASONIC SENSOR(for Front) REMOVAL

PROCEDURE


  1. REMOVE RADIATOR SUPPORT OPENING COVER

    Click here

  2. REMOVE RADIATOR GRILLE PROTECTOR

    Click here

  3. REMOVE FRONT BUMPER COVER

    Click here

  4. REMOVE NO. 4 ENGINE ROOM WIRE


    1. Disconnect the 4 connectors.

    2. Detach the 6 clamps and remove the No. 4 engine room wire.

      A002MRU

  5. REMOVE NO. 1 ULTRASONIC SENSOR

    Tech Tips

    Use the same procedure for all ultrasonic sensors.


    1. A002M1Q

      Detach the 2 claws and remove the ultrasonic sensor.

  6. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER

    A002M2N

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensor retainers.


    1. Detach the 4 claws and remove the No. 1 ultrasonic sensor retainer.