DRIVE BELT REMOVAL
PROCEDURE
REMOVE NO. 2 CYLINDER HEAD COVER
REMOVE RADIATOR SUPPORT OPENING COVER
-
Remove the 3 clips.
Detach the 4 hooks and remove the radiator support opening cover.
-
REMOVE REAR ENGINE UNDER COVER RH
-
Remove the 5 clips and under cover RH.
-
REMOVE V-RIBBED BELT
-
Attach a wrench to the hexagonal portion (A) or (B) of the V-ribbed belt tensioner assembly as shown in the illustration.
Table 1. Text in Illustration *a
5 mm Hexagon Wrench
*b
Hole
*c
Gap
Rotate the V-ribbed belt tensioner assembly clockwise to align the hole with the gap, and then insert a 5 mm hexagon wrench into the hole and gap to secure the V-ribbed belt tensioner assembly.
Remove the V-ribbed belt from the V-ribbed belt tensioner assembly.
-