ULTRASONIC SENSOR(for Front) INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER

    Tech Tips


    • Align the slit of the No. 1 ultrasonic sensor retainer with the protrusion of the front bumper cover and install the No. 1 ultrasonic sensor retainer.

    • Pay attention to the protrusions of the front bumper cover as the orientation of the retainer changes depending on the installation position.

    • Use the same procedure for all No. 1 ultrasonic sensor retainers.

    A002OB6E01
    Text in Illustration
    *a Rear View of Front Bumper - -

    1. A002OX5E02
      Text in Illustration
      *a Slit
      *b Protrusion

      Attach the 4 claws to install the No. 1 ultrasonic sensor retainer to the front bumper cover.

      Note

      Do not damage the bumper cover with the protrusion when installing the retainer.

  2. INSTALL NO. 1 ULTRASONIC SENSOR

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensors.


    1. A002M1Q

      Attach the 2 claws to install the No. 1 ultrasonic sensor.

  3. INSTALL NO. 4 ENGINE ROOM WIRE


    1. Attach the 6 clamps to install the No. 4 engine room wire.

      A002MRU

    2. Connect the 4 connectors.

  4. INSTALL FRONT BUMPER COVER

    Click here

  5. INSTALL RADIATOR GRILLE PROTECTOR

    Click here

  6. INSTALL RADIATOR SUPPORT OPENING COVER

    Click here

  7. ADJUST FOG LIGHT ASSEMBLY

    Click here