CAUTION / NOTICE / HINT
Tech Tips
A bolt without a torque specification is shown in the standard bolt chart Click here.
PROCEDURE
INSTALL FRONT WHEEL OPENING EXTENSION PAD LH
Install the front wheel opening extension pad LH with the 3 screws.
INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL FRONT BUMPER SIDE RETAINER LH
Attach the 2 claws to install the front bumper side retainer LH.
Install the screw and bolt.
INSTALL FRONT BUMPER SIDE RETAINER RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
Install the front bumper reinforcement sub-assembly with the 8 bolts.
Attach the 4 clamps.
INSTALL FRONT BUMPER ENERGY ABSORBER
Install the front bumper energy absorber.
INSTALL FRONT BUMPER COVER
Install the front bumper cover.
w/ Headlight Cleaner System:
Connect the headlight cleaner hose.
Connect the 2 fog light connectors.
w/ TOYOTA Parking Assist-sensor System:
Connect the No. 4 engine room wire connector.
Attach the 6 claws to install the front bumper cover.
Install the bolt and 2 clips.
*a | CORRECT |
*b | INCORRECT |
Install the pin hold clip.
Note
Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.
Tech Tips
Use the same procedure for the RH and LH sides.
Install the screw.
Tech Tips
Use the same procedure for the RH and LH sides.
INSTALL FRONT SPOILER COVER RH
INSTALL FRONT SPOILER COVER LH
INSTALL FRONT SPOILER SIDE PROTECTOR RH
INSTALL FRONT SPOILER SIDE PROTECTOR LH
INSTALL RADIATOR GRILLE PROTECTOR
Install the 2 radiator grille protectors.
INSTALL RADIATOR SUPPORT OPENING COVER
ADJUST FOG LIGHT ASSEMBLY