STEREO JACK ADAPTER ASSEMBLY REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  5. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Audio, for Radio Receiver Type)

    Click here

  7. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (w/ Audio, for Radio and Display Type)

    Click here

  8. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Audio)

    Click here

  9. REMOVE STEREO OPENING COVER WITH BRACKET (w/o Audio)

    Click here

  10. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  11. REMOVE SHIFTING HOLE COVER (for Manual Transaxle)

    Click here

  12. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (except Manual Transaxle)

    Click here

  13. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (except Manual Transaxle)

    Click here

  14. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle)

    Click here

  15. REMOVE FRONT NO. 1 CONSOLE BOX INSERT

    Click here

  16. REMOVE FRONT NO. 2 CONSOLE BOX INSERT

    Click here

  17. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  18. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY


    1. A002OQK

      Disconnect the connector.

    2. A002NUF

      Detach the 2 claws and remove the stereo jack adapter.