RADIATOR REMOVAL

PROCEDURE


  1. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  2. REMOVE RADIATOR SUPPORT OPENING COVER

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER


    1. for Full Cover Type:

      Remove the 11 clips, 6 bolts and No. 1 engine under cover.

    2. for Half Cover Type:

      Remove the 5 clips, 6 bolts and No. 1 engine under cover.

  4. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (w/ Air Conditioning System)

    Click here

  5. DRAIN ENGINE COOLANT

    Click here

  6. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. REMOVE FRONT BUMPER COVER


    1. Remove the front bumper cover Click here.

  9. REMOVE NO. 1 WATER HOSE CLAMP BRACKET

    A002Q7A

    1. Remove the 2 bolts, detach the 2 claws and remove the hose clamp bracket.

  10. REMOVE BATTERY CLAMP SUB-ASSEMBLY

    Click here

  11. REMOVE BATTERY

  12. REMOVE BATTERY TRAY

  13. REMOVE UPPER RADIATOR SUPPORT

    A002MLO

    1. Disconnect the hood lock cable.

    2. Disconnect the horn connector.

    3. Detach the 2 clamps and disconnect the No. 2 water by-pass hose.

    4. Remove the 4 bolts and upper radiator support.

  14. REMOVE RADIATOR SUPPORT CUSHION


    1. A002LSB

      Remove the 2 cushions.

  15. REMOVE NO. 2 FAN SHROUD


    1. A002NAC

      Detach the No. 3 water by-pass hose clamp.

    2. A002Q89

      Remove the 2 bolts, detach the 2 claws and remove the fan shroud.

  16. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY (w/ Air Conditioning System)

    Click here

  17. DISCONNECT SUCTION PIPE SUB-ASSEMBLY (w/ Air Conditioning System)

    Click here

  18. REMOVE CONDENSER ASSEMBLY WITH RECEIVER (w/ Air Conditioning System)

    Click here

  19. REMOVE AMBIENT TEMPERATURE SENSOR (for Automatic Air Conditioning System)

    Click here

  20. DISCONNECT NO. 1 WATER BY-PASS HOSE


    1. A002Q1T

      Disconnect the No. 1 water by-pass hose from the radiator.

  21. DISCONNECT NO. 3 WATER BY-PASS HOSE


    1. A002LOY

      Disconnect the No. 3 water by-pass hose from the No. 2 water by-pass hose.

  22. DISCONNECT NO. 3 RADIATOR HOSE


    1. A002P58

      Disconnect the No. 3 radiator hose from the radiator.

  23. DISCONNECT NO. 2 RADIATOR HOSE


    1. A002P98

      Disconnect the No. 2 radiator hose from the radiator.

  24. REMOVE RADIATOR ASSEMBLY


    1. A002N03

      Disconnect the cooling fan ECU connector and wire harness clamp.

      Note

      Be careful not to damage the connector and wire harness clamp.

    2. A002MC7

      Remove the radiator together with the fan shroud.

    3. Remove the 2 lower radiator supports.

  25. REMOVE NO. 3 WATER BY-PASS HOSE


    1. A002NNF

      Remove the No. 3 water by-pass hose from the radiator.

  26. REMOVE FAN SHROUD


    1. A002PBJ

      Remove the 2 bolts and fan shroud from the radiator.