FUEL LID LOCK CONTROL CABLE ASSEMBLY(for RHD) REMOVAL

PROCEDURE


  1. REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

  2. REMOVE INSTRUMENT SIDE PANEL RH

    Click here

  3. REMOVE COWL SIDE TRIM BOARD RH

    Click here

  4. REMOVE FRONT DOOR SCUFF PLATE RH

    Click here

  5. REMOVE REAR STEP COVER

    Click here

  6. REMOVE REAR DOOR SCUFF PLATE RH

    Click here

  7. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

    Click here

  8. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

    Click here

  9. REMOVE NO. 1 WOOFER BOX SPEAKER ASSEMBLY (for 19 Speakers)

    Click here

  10. REMOVE FUEL FILLER OPENING LID LOCK RETAINER

    A01WTJB

    1. Turn the cable counterclockwise and remove the cable from the retainer.

    2. A01WR98

      Turn the lock retainer counterclockwise and remove the lock retainer.

  11. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. A01WSDM

      Detach the 2 claws.

    2. Disconnect the fuel lid lock control cable and remove the fuel lid lock open lever.

  12. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY


    1. Using a screwdriver, disconnect the clamps shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

      A01WUZR

    2. Remove the lock control cable.