ION GENERATOR REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE UPPER RADIATOR SUPPORT SEAL

   Click here

2. PRECAUTION

   CAUTION:

   Be sure to read the Precautions thoroughly before servicing.

   Click here

   Note

   After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

   Click here

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

   Click here

5. REMOVE INSTRUMENT SIDE PANEL RH

   Click here

6. REMOVE INSTRUMENT PANEL BOX DOOR KNOB

   Click here

7. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

   Click here

8. REMOVE NO. 1 ION GENERATOR SUB-ASSEMBLY

   Note

   
   

   • Dropped No. 1 ion generator sub-assembly cannot be used.

   • Do not subject the No. 1 ion generator sub-assembly to strong impacts, as its case is easily dented and scratched.

   
   

   1. 

      Detach the claw and guide.

   2. 

      Remove the 2 nuts.

   3. 

      Disconnect the connector and remove the No. 1 ion generator sub-assembly with air duct sub-assembly.

9. REMOVE AIR DUCT SUB-ASSEMBLY

   
   

   1. 

      Detach the claw and remove the air duct sub-assembly from the No. 1 ion generator sub-assembly.