INSTRUMENT PANEL SPEAKER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  4. REMOVE FRONT NO. 4 SPEAKER ASSEMBLY


    1. Remove the 2 bolts.

    2. Remove the speaker and disconnect the connector.

      Note

      Do not touch the cone part of the speaker.

      B0018GU

  5. REMOVE ASSIST GRIP SUB-ASSEMBLY

    Click here

  6. REMOVE FRONT PILLAR GARNISH LH

    Click here

  7. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

  8. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY


    1. Remove the 2 bolts.

    2. Remove the speaker and disconnect the connector.

      Note

      Do not touch the cone part of the speaker.

      B001A2DE03
      *1 for 19 Speakers:
      *2 for 9 Speakers: