POWER STEERING ECU(for RHD) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  4. REMOVE INSTRUMENT PANEL BOX ASSEMBLY

    Click here

  5. REMOVE POWER STEERING ECU ASSEMBLY


    1. Remove the bolt and 2 nuts.

      B0019HM

    2. Disconnect the connectors and detach the wire harness clamps to the junction block.

    3. B001ANS

      Remove the bolt and power steering ECU assembly from the junction block.