FRONT ACCELERATION SENSOR REMOVAL

PROCEDURE

1. TABLE OF BOLT, SCREW AND NUT

   Click here

2. PRECAUTION

   Note

   After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. REMOVE STEERING CONTROL ECU WITH JUNCTION BLOCK (for LHD)

   Click here

5. REMOVE STEERING CONTROL ECU WITH JUNCTION BLOCK (for RHD)

   Click here

6. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

   Click here

7. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

   Click here

8. REMOVE ACCELERATION SENSOR (for Driver Side)

   
   

   1. 

      Disconnect the connector.

   2. Remove the bolt and sensor.

      Tech Tips

      Use the same procedures for LHD and RHD vehicles.

9. REMOVE ACCELERATION SENSOR (for Front Passenger Side)

   
   

   1. 

      Disconnect the connector.

   2. Remove the bolt and sensor.

      Tech Tips

      Use the same procedures for LHD and RHD vehicles.