SUSPENSION CONTROL CYLINDER REMOVAL

PROCEDURE


  1. REMOVE TAILPIPE ASSEMBLY

    Click here

  2. REMOVE CENTER EXHAUST PIPE ASSEMBLY

    Click here

  3. REMOVE HEIGHT CONTROL UNIT INSULATOR

    Click here

  4. DISCHARGE SUSPENSION FLUID PRESSURE

    Click here

  5. REMOVE NO. 7 HEIGHT CONTROL TUBE

    Click here

  6. REMOVE SUSPENSION CONTROL PUMP ACCUMULATOR ASSEMBLY

    Click here

  7. REMOVE CLAMP

    Click here

  8. REMOVE NO. 6 HEIGHT CONTROL TUBE

    Click here

  9. REMOVE NO. 6 HEIGHT CONTROL TUBE LH

    Click here

  10. REMOVE NO. 5 HEIGHT CONTROL TUBE LH

    Click here

  11. REMOVE NO. 5 HEIGHT CONTROL TUBE

    Click here

  12. DISCONNECT REAR NO. 4 HEIGHT CONTROL TUBE

    Click here

  13. REMOVE NO. 1 HEIGHT CONTROL VALVE ASSEMBLY

    Click here

  14. DISCONNECT NO. 3 HEIGHT CONTROL TUBE

    A01WTTH

    1. Remove the union bolt and gasket, then disconnect the No. 3 height control tube from the control cylinder.

  15. DISCONNECT NO. 4 HEIGHT CONTROL TUBE LH

    A01WWXA

    1. Remove the union bolt and gasket, then disconnect the No. 4 height control tube from the control cylinder.

  16. DISCONNECT NO. 4 HEIGHT CONTROL TUBE

    A01WPF8

    1. Remove the union bolt and gasket, then disconnect the No. 4 height control tube from the control cylinder.

  17. DISCONNECT NO. 3 HEIGHT CONTROL TUBE LH

    A01WTGU

    1. Remove the union bolt and gasket, then disconnect the No. 3 height control tube from the control cylinder.

  18. REMOVE HEIGHT CONTROL BRACKET WITH CYLINDER ASSEMBLY

    A01WUJ7

    1. Remove the 2 bolts and bracket with cylinder.

  19. REMOVE CENTER SUSPENSION CONTROL CYLINDER SUB-ASSEMBLY

    A01WX03

    1. Remove the 2 nuts and cylinder from the bracket.