FRONT SEAT CUSHION HEATER(for Sports Seat Type) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER (for Driver Side)

    A000R3GE01
    Text in Illustration
    *1 Hog Ring Pliers

    1. Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. A000OL6E01
      Text in Illustration
      *1 Strap
      *2 Hog Ring Pliers

      Using hog ring pliers, connect the 3 straps to the separate type front seat cushion pad with new hog rings.

      Note

      Be careful not to damage the cover.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER (for Front Passenger Side)

    A000QSQE01
    Text in Illustration
    *1 Hog Ring Pliers

    1. Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. A000PDDE01
      Text in Illustration
      *1 Strap
      *2 Hog Ring Pliers

      Using hog ring pliers, connect the 3 straps to the separate type front seat cushion pad with new hog rings.

      Note

      Be careful not to damage the cover.

  3. INSTALL SEAT CUSHION COVER WITH PAD (for Driver Side)


    1. Set the seat cushion cover with pad in place.

    2. Attach the hooks to install the seat cushion cover with pad.

    3. A000OTVE01
      Text in Illustration
      *1 Hog Ring Pliers

      Attach the 4 clips to connect the front part of the separate type front seat cushion cover.

    4. Using hog ring pliers, install new hog rings.

    5. Close the front part of the separate type front seat cushion cover with the 2 clips.

    6. Install the 4 clips.

    7. Connect the connector and install the connector lock to the seat heater control sub-assembly LH connector.

    8. Connect the 2 connectors.

    9. Install the clip.

    10. Attach the hook to connect the rubber band.

    11. Connect the rubber band with the clip.

  4. INSTALL SEAT CUSHION COVER WITH PAD (for Front Passenger Side)


    1. Set the seat cushion cover with pad in place.

    2. Attach the hooks to install the seat cushion cover with pad.

    3. Connect the connector.

    4. Install the 4 clips.

    5. Connect the connector and install the connector lock to the seat heater control sub-assembly LH connector.

    6. Connect the 2 connectors.

    7. Install the clip.

    8. Attach the hook to connect the rubber band.

    9. Connect the rubber band with the clip.

  5. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  6. INSTALL FRONT POWER ADJUSTER SHIELD LH


    1. Install 2 new clips to the front power adjuster shield LH.

    2. for Driver Side:

      Connect the connector.

    3. for Front Passenger Side:

      Connect the 2 connectors.

    4. Attach the 2 clips to install the front power adjuster shield LH.

    5. Install the 2 screws.

  7. INSTALL FRONT SEAT INNER CUSHION SHIELD LH

    Click here

  8. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  9. INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD LH (for Driver Side)

    Click here

  10. INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD RH (for Front Passenger Side)

    Click here

  11. INSTALL FRONT SEAT ASSEMBLY

    Click here

  12. CHECK SRS WARNING LIGHT

    Click here

  13. INSPECT SEAT BELT WARNING SYSTEM

    Click here

  14. INSPECT SEAT HEATER SYSTEM

    Click here

  15. INSPECT CLIMATE CONTROL SEAT SYSTEM

    Click here

  16. INSPECT POWER SEAT CONTROL SYSTEM

    for LHD: Click here

    for RHD: Click here

  17. ENABLE AUTOAWAY/RETURN FUNCTION


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter Click here.