FRONT SEAT ASSEMBLY(for Sports Seat Type) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE SEAT ADJUSTER COVER CAP LH

    A000QSE

    1. Remove the 2 seat adjuster cover caps.

  2. REMOVE FRONT SEAT INNER NO. 1 CUSHION SHIELD LH (for Driver Side)

    A000O21

    1. Remove the screw.

    2. Detach the 2 claws and 2 clips and remove the front seat inner No. 1 cushion shield LH.

  3. REMOVE FRONT SEAT INNER NO. 1 CUSHION SHIELD RH (for Front Passenger Side)

    A000QRH

    1. Remove the screw.

    2. Detach the 2 claws and 2 clips and remove the front seat inner No. 1 cushion shield RH.

  4. REMOVE FRONT SEAT CUSHION SHIELD LH

    A000OS9E01
    Text in Illustration
    *1 Hook
    *2 Guide

    1. Remove the 2 screws.

    2. Detach the 3 claws and 2 guides.

    3. Detach the hook and remove the front seat cushion shield LH.

  5. REMOVE FRONT SEAT INNER CUSHION SHIELD LH

    A000N63E01
    Text in Illustration
    *1 Hook
    *2 Guide

    1. Remove the screw.

    2. Detach the 3 claws and 3 guides.

    3. Detach the hook and remove the front seat inner cushion shield LH.

  6. REMOVE POWER SEAT SWITCH KNOB LH (for Slide)

    A000RESE01
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Using moulding remover A, detach the 4 claws and remove the power seat switch knob LH.

  7. REMOVE POWER SEAT SWITCH KNOB LH (for Reclining)

    A000P2TE01
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Using moulding remover A, detach the 3 claws and remove the power seat switch knob LH.

  8. REMOVE FRONT POWER ADJUSTER SHIELD LH


    1. A000RVN

      Remove the 2 screws.

    2. Detach the 2 clips and remove the front power adjuster shield LH.

    3. A000QWO

      for Driver Side:

      Disconnect the connector.

    4. A000Q4N

      for Front Passenger Side:

      Disconnect the 2 connectors.

    5. A000R4U

      Remove the 4 screws and switch bezel from the front power adjuster shield LH.

    6. A000P4Y

      Remove the 2 clips from the front power adjuster shield LH.

  9. REMOVE POWER SEAT SWITCH ASSEMBLY

    Click here

  10. REMOVE FRONT LUMBAR POWER SEAT SWITCH (for Front Passenger Side)

    Click here

  11. REMOVE UPPER SEAT TRACK RAIL COVER LH

    A000OG1

    1. Remove the screw.

    2. Detach the clip and remove the upper seat track rail cover LH.

  12. REMOVE SEAT POSITION AIRBAG SENSOR (for Driver Side)

    Click here

  13. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  14. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH


    1. A000S05

      Using a clip remover, remove the clip and disconnect the rubber band.

    2. Detach the hook and disconnect the rubber band.

    3. Using a clip remover, remove the clip.

    4. A000QN4

      Open the lower part of the front seatback board sub-assembly LH and remove the 2 screws.

    5. Push and slide the front seatback board subassembly LH to detach the claw.

      Tech Tips

      Use the same procedure to detach the claw on the other side.

    6. Slide the front seatback board sub-assembly LH downward to detach the 2 hooks and remove it.

  15. REMOVE FRONT SEAT LEG COVER LH

    A000NCE

    1. Remove the 2 screws.

    2. Detach the clip and remove the front seat leg cover LH.

  16. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH

    A000SCG

    1. Remove the 2 screws.

    2. Detach the clip and remove the front seat lower cushion shield LH.

  17. REMOVE SEAT CUSHION COVER WITH PAD (for Driver Side)

    A000Q2AE01
    Text in Illustration
    *1 Connector Lock - -

    1. Disconnect the 2 connectors.

    2. Remove the connector lock from the seat heater control sub-assembly LH connector and disconnect the connector.

    3. Using a clip remover, remove the 4 clips.

    4. Using a clip remover, remove the 2 clips and open the front part of the separate type front seat cushion cover.

    5. A000S4N

      Remove the hog rings.

    6. Using a clip remover, detach the 4 clips and disconnect the front part of the separate type front seat cushion cover.

    7. Detach the hooks and remove the seat cushion cover with pad.

  18. REMOVE SEAT CUSHION COVER WITH PAD (for Front Passenger Side)

    A000R6BE01

    1. Disconnect the 2 connectors.

    2. Remove the connector lock from the seat heater control sub-assembly RH connector and disconnect the connector.

      Text in Illustration
      *1 Connector Lock

    3. Using a clip remover, remove the 4 clips.

      A000QWJ
    4. A000OEY

      Disconnect the connector.

    5. Detach the hooks and remove the seat cushion cover with pad.

  19. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (for Driver Side)


    1. A000RKDE01
      Text in Illustration
      *1 Strap

      Remove the hog rings and disconnect the 3 straps from the separate type front seat cushion pad.

    2. A000QJ1

      Remove the hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.

  20. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (for Front Passenger Side)


    1. A000QG1E01
      Text in Illustration
      *1 Strap

      Remove the hog rings and disconnect the 3 straps from the separate type front seat cushion pad.

    2. A000NSZ

      Remove the hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.

  21. REMOVE SEAT CUSHION SPRING DAMPER

    A000QW3

    1. Remove the 2 nuts and seat cushion spring damper.

  22. REMOVE SEATBACK COVER WITH PAD (for Driver Side)


    1. A000P5J

      Detach the hooks.

    2. A000O42

      Detach the wire harness clamp.

    3. A000Q4Q

      Detach the 4 claws and remove the 2 front seat headrest supports.

    4. A000QVAE03

      Detach the wire harness clamp.

    5. Remove the 2 nuts and detach the seatback cover bracket.

      Text in Illustration
      *1 Seatback Cover Bracket

    6. Remove the seatback cover with pad.

  23. REMOVE SEATBACK COVER WITH PAD (for Front Passenger Side)


    1. A000P15

      Detach the hooks.

    2. A000RWJ

      Detach the 4 claws and remove the 2 front seat headrest supports.

    3. A000PWJE03

      Detach the wire harness clamp.

    4. Remove the 2 nuts and detach the 2 seatback cover brackets.

      Text in Illustration
      *1 Seatback Cover Bracket

    5. Remove the seatback cover with pad.

  24. REMOVE SEPARATE TYPE FRONT SEATBACK COVER (for Driver Side)


    1. A000RYD

      Remove the hog rings and separate type front seatback cover from the separate type front seatback pad.

  25. REMOVE SEPARATE TYPE FRONT SEATBACK COVER (for Front Passenger Side)


    1. A000N19

      Pass the 2 seatback cover brackets through the 2 holes of the separate type front seatback pad.

    2. A000OI5

      Remove the hog rings and separate type front seatback cover from the separate type front seatback pad.

  26. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY


    1. A000OM5

      Remove the screw and No. 1 interior illumination light assembly.

    2. Disconnect the connector.

  27. REMOVE SEATBACK CLIMATE CONTROL BLOWER LH

    A000QZG

    1. Disconnect the connector.

    2. Detach the 2 claws and disconnect the rear air duct LH from the lumbar support adjuster assembly LH.

    3. Remove the 2 screws.

    4. Detach the hook and remove the seatback climate control blower LH together with the rear air duct LH.

  28. REMOVE REAR AIR DUCT LH

    A000SW9

    1. Detach the 2 claws and remove the rear air duct LH from the seatback climate control blower LH.

  29. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (for Driver Side)

    Click here

  30. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY RH (for Front Passenger Side)

    Click here

  31. REMOVE FRONT SEATBACK INSIDE SPRING SET PLATE LH (for Front Passenger Side)

    A000Q68

    1. Remove the front seatback inside spring set plate LH from the front seat bracket LH.

  32. REMOVE FRONT SEAT BRACKET LH (for Front Passenger Side)

    A000QSH

    1. Remove the nut and front seat bracket LH.

  33. REMOVE FRONT SEATBACK INSIDE SPRING SET PLATE RH (for Front Passenger Side)

    Tech Tips

    Use the same procedure described for the LH side.

  34. REMOVE FRONT SEAT BRACKET RH (for Front Passenger Side)

    Tech Tips

    Use the same procedure described for the LH side.

  35. REMOVE FRONT SEATBACK SUPPORT LH (for Driver Side)

    A000Q8VE01

    1. Disconnect the connector.

    2. Remove the 4 nuts and both paddles of the front seatback support LH.

      Text in Illustration
      *1 Paddle
    3. A000S8X

      Remove the nut and front seatback support LH.

  36. REMOVE FRONT SEAT AIRBAG ASSEMBLY LH

    Click here

  37. REMOVE INNER SEAT BRACKET ASSEMBLY LH (for Driver Side)

    A000QP0

    1. Remove the 2 nuts and inner seat bracket assembly LH.

  38. REMOVE POWER SEAT MOTOR ASSEMBLY


    1. A000SHI

      Disconnect the connector.

    2. A000S1M

      Detach the 5 claws and remove the push nut from the reclining connecting pipe.

    3. A000PSR

      Remove the reclining connecting pipe.

    4. Remove the bolt and power seat motor assembly.

  39. REMOVE RECLINING ADJUSTER INSIDE COVER

    A000PFL

    1. Remove the reclining adjuster inside cover.

  40. REMOVE FRONT NO. 1 SEATBACK WIRE SET BRACKET (for Front Passenger Side)

    A000SE6

    1. Remove the nut and front No. 1 seatback wire set bracket.

  41. REMOVE FRONT NO. 2 SEATBACK WIRE SET BRACKET (for Front Passenger Side)

    A000N80

    1. Remove the nut and front No. 2 seatback wire set bracket.

  42. REMOVE POSITION CONTROL ECU ASSEMBLY (w/ Memory)

    Click here

  43. REMOVE RECLINING ADJUSTER INSIDE COVER LH

    A000PFCE04
    Text in Illustration
    *1 Guide
    *2 Hook

    1. Remove the screw and detach the guide.

    2. Detach the 2 hooks and remove the reclining adjuster inside cover LH.

  44. REMOVE RECLINING ADJUSTER INSIDE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  45. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY LH

    A000NU8

    1. Detach the claw and remove the seat heater control sub-assembly LH.

  46. REMOVE SEAT CLIMATE CONTROL BLOWER LH

    A000Q26

    1. Disconnect the connector.

    2. Remove the 2 screws.

    3. A000T2LE04
      Text in Illustration
      *1 Tab

      Open the 2 tabs as shown in the illustration.

    4. Detach the 2 hooks and remove the seat climate control blower LH together with the seat cushion climate control duct LH from the separate type front seat cushion spring assembly.

  47. REMOVE SEAT CUSHION CLIMATE CONTROL DUCT LH

    A000RMA

    1. Detach the 2 claws and remove the seat cushion climate control duct LH from the seat climate control blower LH.

  48. REMOVE SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY

    A000NN8E06
    Text in Illustration
    *A for Driver Side
    *1 Wire Harness Clamp
    *2 Hook A
    *3 Hook B

    1. for Driver Side:

      Detach the 4 wire harness clamps.

    2. for Front Passenger Side:

      Detach the 3 wire harness clamps.

    3. Detach the 4 hooks A.

    4. Detach the 4 hooks B and remove the separate type front seat cushion spring assembly.

  49. REMOVE FRONT SEAT WIRE (for Driver Side)


    1. A000SKR

      Detach the 6 wire harness clamps.

    2. A000NNB

      Disconnect the 3 connectors.

    3. Remove the nut and disconnect the ground wire.

    4. Detach the 8 wire harness clamps and remove the front seat wire.

  50. REMOVE FRONT SEAT WIRE (for Front Passenger Side)


    1. A000RXE

      Detach the 4 wire harness clamps.

    2. A000PWM

      Disconnect the 3 connectors.

    3. Detach the 9 wire harness clamps and remove the front seat wire.

  51. REMOVE SEATBACK FELT (for Front Passenger Side)

    A000QQ2

    Remove the seatback felt.

  52. REMOVE FRONT SEATBACK FRAME SUB-ASSEMBLY LH

    A000QPG

    1. Remove the 4 bolts and front seatback frame sub-assembly LH from the front seat adjuster LH.