CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
REMOVE FRONT SEAT ASSEMBLY
REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH
REMOVE SEATBACK COVER WITH PAD (for Driver Side)
Disconnect the connector.
Detach the hooks.
Detach the wire harness clamp.
Detach the 4 claws and remove the 2 front seat headrest supports.
Detach the wire harness clamp.
Remove the 2 nuts and detach the seatback cover bracket.
*1 | Seatback Cover Bracket |
Remove the seatback cover with pad.
REMOVE SEATBACK COVER WITH PAD (for Front Passenger Side)
Disconnect the connector.
Detach the hooks.
Detach the 4 claws and remove the 2 front seat headrest supports.
Detach the wire harness clamp.
Remove the 2 nuts and detach the 2 seatback cover brackets.
*1 | Seatback Cover Bracket |
Remove the seatback cover with pad.
REMOVE SEATBACK CLIMATE CONTROL BLOWER LH
REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (for Driver Side)
Disconnect the 2 connectors.
Detach the 2 cable clamps.
Remove the 2 springs and detach the 2 clips.
Remove the 2 bolts.
Slide the lumbar support adjuster assembly LH upward to detach the 2 hooks and remove it.
REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY RH (for Front Passenger Side)
Disconnect the connector.
Remove the 2 springs and detach the 2 clips.
Remove the 2 bolts.
Slide the lumbar support adjuster assembly RH upward to detach the 2 hooks and remove it.