LIGHT CONTROL RHEOSTAT INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL TRIP SWITCH (LIGHT CONTROL RHEOSTAT)


    1. Attach the 2 claws to install the trip switch (light control rheostat).

  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

  4. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  6. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  7. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  10. ENABLE AUTOAWAY/RETURN FUNCTION


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter Click here.