ELECTRICAL KEY OSCILLATOR(for Rear Floor) INSTALLATION

PROCEDURE

1. INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

   
   

   1. Attach the 4 claws to install the No. 2 indoor electrical key antenna assembly.

   2. Connect the connector.

   3. Attach the claw to close the lid.

   4. Return the floor carpet to its original position and attach the 2 clips.

2. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

   Click here

5. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

   Click here

6. CHECK SEAT HEATER OPERATION (w/ Seat Heater System)

   Click here