INTRUSION SENSOR INSTALLATION

PROCEDURE

1. INSTALL THEFT WARNING RADAR SENSOR

   
   

   1. Install the theft warning radar sensor with the 6 screws.

   2. Attach the 4 clamps to install the wire harness.

   3. Connect the connector.

2. INSTALL MAP LIGHT ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

   Click here

5. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

   Click here