INTEGRATION RELAY INSTALLATION

PROCEDURE

1. INSTALL NO. 2 INTEGRATION RELAY

   
   

   1. Connect the 3 connectors.

   2. Attach the 2 claws to install the No. 2 integration relay.

2. INSTALL NO. 1 RELAY BLOCK COVER

   
   

   1. Attach the 3 claws.

   2. Attach the 2 clamps and install the No. 1 relay block cover.

3. INSTALL COOL AIR INTAKE DUCT SEAL

   Click here

4. INSTALL ENGINE ROOM SIDE COVER

   Click here

5. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

6. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

   Click here

7. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

   Click here