REAR CROSS TRAFFIC ALERT BUZZER INSTALLATION

PROCEDURE

1. INSTALL BLIND SPOT MONITOR BUZZER

   
   

   1. Attach the clamp and install the blind spot monitor buzzer.

   2. Connect the connector.

2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

   Click here

3. INSTALL INNER ROOF SIDE GARNISH LH

   Click here

4. INSTALL INNER ROOF SIDE GARNISH RH

   Click here

5. INSTALL REAR SEAT SIDE GARNISH LH

   Click here

6. INSTALL REAR SEAT SIDE GARNISH RH

   Click here

7. INSTALL REAR DOOR SCUFF PLATE LH

   Click here

8. INSTALL REAR DOOR SCUFF PLATE RH

   Click here

9. INSTALL BENCH TYPE REAR SEATBACK ASSEMBLY

   Click here

10. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

    Click here

11. INSTALL REAR SEAT HEADREST ASSEMBLY

    Click here

12. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

    Click here

13. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

14. CHECK SRS WARNING LIGHT

    Click here

15. INSPECT REAR SEAT HEATER SYSTEM (w/ Seat Heater System)

    Click here

16. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

17. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here